ANYCUBIC Water-Wash Resin 2.0 is a light-curing resin for LCD/DLP 3D printing that enables easy cleaning with water (no IPA required), offers high printing accuracy, lower odor, and higher crack resistance. Thanks to low shrinkage and stable viscosity, it produces detailed prints with a smooth surface and a long-lasting attractive appearance thanks to yellowing protection.
ANYCUBIC Water-Wash Resin 2.0 in gray is designed for 3D printers using LCD and DLP technology with UV curing. Its hydrophilically modified composition allows convenient removal of residual material after printing using only water, simplifying post-processing and reducing operating costs – without compromising surface quality.
After curing, the material offers increased mechanical resistance and lower susceptibility to cracking (elongation at break 16–22%). Low volumetric shrinkage supports accurate results and helps preserve details; the manufacturer states accuracy up to 0.15 mm. The improved formula also reduces the risk of yellowing, so models retain their aesthetic appearance for longer.
Main advantages:
- Water cleaning (95% IPA / water can also be used as needed)
- High accuracy and fine details (stated accuracy 0.15 mm)
- Higher crack resistance and good strength after curing
- Lower odor and yellowing protection
- Compatibility with LCD/DLP printers for UV curing in the range 365–405 nm (typically 405 nm)
- Stable material flow thanks to viscosity 190–230 mPa·s (25 °C) and better adhesion to the build plate
Specifications
- Manufacturer
- ANYCUBIC
- Model
- Water-Wash Resin 2.0
- Color
- gray
- Material
- light-curing resin modified with hydrophilic groups
- Wavelength
- 365–405 nm
- Viscosity
- 190–230 mPa·s (25 °C)
- Density
- 1.07–1.09 g/cm³
- Hardness
- 82–85 HD
- Tensile strength
- 38–43 MPa
- Elongation at break
- 16–22 %
- Flexural modulus
- 48–60 MPa
- Flexural strength
- 2300–3000 MPa
- Young's modulus
- 1100–1300 MPa
- Izod impact strength
- 133 J/m
- Volumetric shrinkage
- 2.2–5.5 %
- Printing temperature
- 20–50 °C
- Recommended ambient temperature during printing
- 20–40 °C
- First-layer exposure time
- 25–40 s
- Standard-layer exposure time
- 2–2.5 s
- Cleaning agent
- 95% IPA / water
- Cleaning time
- 95% IPA: ≤3 min; water: medium, ≤5 min
- UV curing wavelength
- 405 nm
- Curing temperature
- 18–30 °C
- UV intensity
- 25,000–30,000 µW/cm²
- Curing time
- 3 min
- Weight
- 1 kg
